Ihr Warenkorb
keine Produkte

Openvox VS-EIU-1001, VoxStack EIU-1001 1 port T1/E1 adapter

Art.Nr.:
2082
VS-EIU-1001 is 1 port T1/E1 adapter. It supports up to 32 channels in E1 mode or 24 channels in T1 modes. VS-EIU-1001E supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported.

Target Applications

  • Voice-over Internet Protocol (VoIP) Services
  • Complex IVR Trees
  • "Meet-Me" Bridge Conferencing
  • Calling Card Platforms
  • VoIP Gateways (support SIP, H.323, and IAX)
  • Legacy PBX/IVR Services
  • Voice/Data Router (replace expensive routers)
  • PRI/Switch Compatibility - Network or CPE

Technical Specifications

  • Single T1/E1 ports with PCI interface for high performance voice and data applications
  • Half-length PRI card
  • RJ48 connector
  • Low profile option
  • FPGA design, upgradeable firmware onsite
  • Power: 2.1W Minimum, 3.1W Maximum at 3.3 V or 5 V.
  • Operation temperature: 0°C to 50°C
  • Storage temperature: -65°C to 125°C
  • Dimension: 2U Form factor: 12*6.4*1.8cm
  • Weight: 300g
Features
  • Industry 1st adjustable interrupt routing design
  • FPGA design, upgradeable firmware onsite
  • AT&T 4ESS
  • Signaling: PRI, SS7 (TUP & ISUP), OpenR2
  • National ISDN 2
  • Octasic. Hardware Echo Cancellation Module Available
  • RoHS Compliant
  • Certificates: FCC, CE & CS-03
  • Interrupt frequency adjustment
  • Compatible with all commercial available motherboards
  • PRI/Switch Compatibility - Network or CPE
  • Euro ISDN (PRI or PRA) - Q.931/Q.921
  • CAS Voice Modes
  • DMS100
  • Lucent 5E
  • Compatible with most operation platform, Asterisk, Elastix and so on
Notice: The VS-EIU-1001 can't work in GW1202/GW1600,but can work in GW2120 only when install the motherboard together in the GW2120.